This article contains sponsored links. Learn More
DHP Miles Twin Over Twin Low Metal Bunk Bed
Basic Facts
- Crafted of steel metal tubes
- Weight capacity for top bunk: 200 lbs
- Dimensions: 77.5” L x 41.5” W x 54” H
- Guardrail height: 12.5”
- Maximum mattress thickness for top bunk: 6”
- Space between bottom and top bunk: 37”
- Clearance — floor to bottom: 2”
- Space between mattress slats: 3.5”
- Available in 4 finishes
- Net weight: 78 lbs
Introduction
DHP Miles is a simple, compact and space-friendly low metal bunk. It comes in various size combinations that are capable of fulfilling every need: twin over twin, twin over full and full over full configurations are available.
The bed is 54 inches tall. This a little (4 inches or so) more than is usual for a low bunk bed and it already approaches mid-height territory. This can be a good thing or not, depending on the point of view. If safety is your concern, then you’ll probably look at the fact that the mattress lies 4 inches higher with a suspicious eye. Although, let’s face it, how much difference does 4 inches really make?
On the other hand, a taller bunk bed means more clearance between the bunks and that is undoubtedly a good thing. Low bunk beds, let’s admit it, are usually a little cramped on the lower bunk. This one, however, with 37 inches of vertical space between bunks — which translates to 31 inches with a 6 inch mattress in place — offers the same amount of comfort down there as the majority of regular-height bunk beds do.
The guardrail height is specified at 12.5 inches. This is not a particularly tall guardrail, but it will do just fine if you stick with the recommended 6 inch mattress on the upper bed. On the bottom bunk you can go with something thicker if you prefer as there is plenty enough space.
The weight limit for the Miles twin metal bunk bed is specced at 200 lbs for the top bunk and 250 lbs for the lower bunk. The mattress support is seemingly identical on both beds: 22 metal slats spaced 3.5 inches apart. You may wonder why then the difference in weight limit specification. While I don’t really know the answer, I can speculate that it’s probably just a matter of caution: if something breaks on the lower bunk nothing will happen with the bed less than 3 inches off the floor. On the upper bunk, however…
The ladder here is vertical, clipped on. As expected, the rungs are pretty thin and probably not very pleasant on the feet, but that’s an issue with the majority of metal bunk beds. Often people use some sort of cushioning (such as pipe insulation) to remedy the problem. There are now even bunk bed ladder pads made specifically for that purpose.
DHP Miles Metal Bunk Beds are available in 4 finishes: black, white, silver and blue.
DHP Miles Twin Over Full Low Metal Bunk Bed
There is little difference between the twin/twin and twin/full versions of the Miles bunk bed. The lower bunk obviously is enlarged to full size. A centered backing rod is added to its mattress support structure, raising the static load the lower bunk can withstand to 450 lbs.
- Weight capacity for lower bunk: 450 lbs
- Dimensions: 77.5” L x 56.5” W x 54” H
- Net weight: 90 lbs
DHP Miles Full Over Full Low Metal Bunk Bed
The full over full version adds the centered rod to support the mattress slats on the top bunk as well. Consequently, the weight limit for the top bunk is raised to 300 lbs. The lower bunk remains at 450 lbs.
- Weight capacity for top bunk: 300 lbs
- Dimensions: 77.5” L x 56.5” W x 54” H
- Net weight: 97 lbs
What Users Say
Up to the time of this writing I have seen more than 10 000 ratings on the Miles metal low bunk bed throughout various shopping sites. The average rating depends on the site, but is usually around 4.5 or 4.6 stars. Almost 75% of reviewers gave this bed the maximum 5 stars.
Quality Of Build: As can be concluded from the ratings, the majority of buyers seems to be very happy with the quality of this bunk bed. Among other things they call it sturdy, solid, reliable. The metal is described as light weight but not flimsy. The components are said to be well built with quality materials. The finish is reportedly even and without blemishes.
With so many units sold, there are bound to be some unhappy buyers as well. Negative reviews in the quality department have mostly to do with breakages and noisiness. I’ve seen several reports of loose screws that have to be retightened all the time. For some users the bunk bed wobbles and creaks and some feel the materials used are cheap and flimsy.
Ease Of Assembly: By and large the buyers report this bed is not difficult to assemble. Everything is said to be organized well and labelled appropriately. The directions are reportedly well written and easy to read and understand, with pictures that are very helpful. It is definitely recommended to have two people for the job, although I did see a few users claiming they did it all by themselves. But, some larger parts can be cumbersome to handle, even if they are not particularly heavy.
The users with an opposite experience speak of mislabelled pieces, unclear instructions and missing or incorrectly drilled wholes. Perhaps it is worth mentioning here that I’ve seen a user suggest very strongly that anyone saying the holes were drilled poorly simply put the bed together incorrectly. I’m not saying this is necessarily the case with everyone having assembly issues, but it certainly doesn’t cost anything to check the directions again. And one more time if necessary.
Design: While this bed probably won’t win any design awards, there are those who call it great looking and even beautiful.
However, I’ve seen some complaints that have to do with the functional side of the design rather than the aesthetic side. Specifically, the problem seems to be with the two-inch gap between the floor and the lower bunk. One user would rather have the bed flush with the floor in order to stop the kids from pushing toys and whatnot in there. According to her, the bed needs to be moved daily in order to prevent buildup underneath.
Another user, however, felt that this gap was insufficient, in the sense that it doesn’t allow for an adequate air circulation underneath the bed. This leads to accumulation of dust and mold and allergens at the bottom of the bed and, subsequently, on the mattress. Which can lead to health issues.
Bottom Line
This is a very popular bunk bed. With more than ten thousand ratings on it, it’s anyone’s guess how many units actually sold so far. And all those people probably can’t be wrong.